|
|
| Main · Guitar Amps · Parts & DIY · Ordering · Forums |
(click for larger) |
Guitar BoardsThese famous guitar turret boards are made of FR4 material and feature silver plated turrets. |
|
Price Direct From CK Amps:
Champ 5F1 board $18.75/ea. (pic) Champ AA764 $19.00/ea. (pic) Tweed Deluxe 5E3 $20.75/ea. (pic) 18W TMB (Richie version) $28.50/ea. (pic) 18W (original w/tremolo) $28.50/ea. (pic) (F.O.B. Rosedale, BC, Canada.) All International Customers: (F.O.B. Rosedale, BC, Canada. Brokerage and taxes are NOT included in the price.) |
|
(click for larger) |
Blank FR4 materialThis blank FR4 material is great for custom making your own turret boards for guitar or HiFi amplifier projects. 2mm thick fibreglass board is 68mm (2-5/8") wide and is in limited stock in the various lengths listed (custom cuts, drilling or turret service aren't available at this time). Perfect with our silver plated split top turrets below. |
|
Price Direct From CK Amps:
6" Length $4.50/ea. 7" Length $5.25/ea. 9.5" Length $7.13/ea. 10.25" Length $7.69/ea. (F.O.B. Rosedale, BC, Canada.) All International Customers: (F.O.B. Rosedale, BC, Canada. Brokerage and taxes are NOT included in the price.) |
|
(click for larger) |
Perf BoardPerf board is great for HiFi, guitar amplifier, crossover or other electronic projects. Just about anywhere you need to fit a variety of various objects of different lead lengths. Heavy duty glass epoxy board with 216 holes on a 9.5mm (3/8") grid in a 27 x 8 pattern. Measures 262mm (10-5/16") long, 78.5mm (3-3/32") wide by 2mm (5/64") thick. Same grid size as of JTM45. Holes will accomodate eyelets or turrets, #4 screws or anything requiring a 1/8" hole for clearance. The glass epoxy construction means the board will not chip, flake, crack or break if you redrill for another hole size or add more holes offset to the grid. The board can also handle higher tempratures than standard fibre or phenolic based perf boards. Wirewound power resistors won't give this board a heart attack over time. |
|
Price Direct From CK Amps - $15.00
(F.O.B. Rosedale, BC, Canada.) All International Customers: (F.O.B. Rosedale, BC, Canada. Brokerage and taxes are NOT included in the price.) |
|
(click for larger) |
Silver Plated Split Top TurretsSuper quality new manufacture silver plated brass split top turrets for perfboards. Use our perfboard above or create your own turret board for HiFi or guitar, crossovers or instrumentation. Two sizes are available, small and large. The large turrets fit our perfboard and require a 7/64" hole and 5/32" anvil. The small turrets require a 5/64" hole and a 7/64" anvil. |
|
Large Turrets - $10 USD/25 turrets or $0.50 USD/ea.
Small Turrets - $7.50 USD/25 turrets or $0.38 USD/ea. (F.O.B. Rosedale, BC, Canada.) All International Customers: (F.O.B. Rosedale, BC, Canada. Brokerage and taxes are NOT included in the price.) |
|
(click for larger) |
Tag BoardThis tag board is great for guitar amplifier repair or DIY electronic projects. Heavy duty design with 24 pairs of independent, pre-tinned tags. Measures 200mm (7-7/8") long, 78mm (3-1/16") wide by 13mm (1/2") thick (including the tags. Base board material which insulates the tags from the rear is 3mm (1/8") thick). This is no flimsy board either, manufactured from resin composites. Tag board is better than conventional Turret board in many ways. Component leads can be layed into the tags, rather than wrapped around. This makes for tighter construction and easier disassembly or replacement of parts. Also there is much less physical force exerted, since you don't wrap the leads, meaning longer life. Room enough for mounting larger components, like axial capacitors and wirewound resistors. Holes down the centre of the board for mounting tube sockets on standoffs... handy for making an all-on-one project! Tag board is great, especially for development or continual circuit modification when repeated soldering/desoldering of components is required. #6-32 x 1/2" mounting hardware included, as shown. |
|
Price Direct From CK Amps - $12.50
(F.O.B. Rosedale, BC, Canada.) All International Customers: (F.O.B. Rosedale, BC, Canada. Brokerage and taxes are NOT included in the price.) |
|
(click for larger) |
Turret BoardTurret board created by CK Amps for heavy duty musician/amplifier use! This turret board is great for guitar amplifier repair or DIY electronic projects right up into RF! Heat and high frequency stable design with 19 pairs of independent, silver plated turrets. Measures 200mm (7-7/8") long, 78mm (3-1/16") wide and is on 2.2mm FR4 grade glass epoxy board. Rear can easily be insulated from the chassis with electrical grade cardboard or a simple spacer on the mounting screws. The holes on this turret board are spaced to allow chassis mountable octal or 9-pin sockets to be mounted on standoffs, to allow a standalone point-to-point wired project! |
|
Price Direct From CK Amps - $14.50
(F.O.B. Rosedale, BC, Canada.) All International Customers: (F.O.B. Rosedale, BC, Canada. Brokerage and taxes are NOT included in the price.) |
|
(click for larger) |
Quad Turret Experimenter BoardStrong 2.2mm thick glass epoxy board pre drilled to accept four 9-pin minature tube sockets (3/4" hole) and has 60 silver plated brass turrets. Board is suitable for audio as well as RF projects. Turrets are hollow and leads from the tube sockets can be routed underneath while your components and leadoff wires can reside on top. Board measures 160mm (6-1/4") by 200mm (7-7/8"). |
|
Price Direct From CK Amps - $25.00
(F.O.B. Rosedale, BC, Canada.) All International Customers: (F.O.B. Rosedale, BC, Canada. Brokerage and taxes are NOT included in the price.) |
|
|
(click for larger) |
Quad Turret Experimenter BoardAs above, only holes for 2 x 9-pin and 2 x octal sockets. |
|
Price Direct From CK Amps - $25.00
(F.O.B. Rosedale, BC, Canada.) All International Customers: (F.O.B. Rosedale, BC, Canada. Brokerage and taxes are NOT included in the price.) |
|